4HK1 8-98226185-0 L , 4HK1 8-98226181-0 R Head Lamp ISUZU Fits NKR700P

Descrizione di prodotto

📋 Product Basic Information

✨ Product Features & Advantages

📦 Packaging Information

🔧 Installation & Replacement Recommendations

• Installation Method: Direct replacement (Plug & Play / Direct Bolt-on). Professional installation by a qualified automotive technician is strongly recommended.

• Replacement Interval: Replace the headlamp assembly when you notice lens yellowing, hazing, reduced light output, internal condensation, moisture ingress, or physical damage to the housing.

• Compatibility Check: When replacing the headlamp assembly, it is advisable to inspect the bulb condition simultaneously. If necessary, replace the bulb at the same time to ensure optimal lighting performance.

• Pair Replacement Recommendation: If one side fails due to aging or accident damage, replacing both left and right assemblies simultaneously is recommended. This ensures consistent brightness, beam pattern, and color temperature, preventing uneven illumination caused by mismatched new and old units.

• Post-Installation Aiming: After installation, headlamp beam alignment must be readjusted to comply with road safety regulations and prevent glare to oncoming traffic.

• Professional Service Advisory: The headlamp assembly is connected to the vehicle's electrical system. We strongly recommend having a certified technician perform the installation to avoid wiring errors or improper sealing, which may cause subsequent issues.

⚠️ Important Notes

1. Before purchasing, verify your original part number to confirm it matches 8-98226185-0 (Left) or  8-98098481-LS (Right).

2. Confirm whether the mounting position is Left Side (driver side) or Right Side (passenger side) for your vehicle configuration to avoid ordering the wrong side.

3. This product is a complete headlamp assembly, including housing, reflector, and bulb holder. Please confirm whether bulbs are included or need to be purchased separately.

4. Professional installation is strongly advised to ensure proper sealing and correct beam alignment as per safety standards.

5. Verify your vehicle model and chassis code prior to installation to confirm full compatibility.

6. When replacing both sides as a pair, ensure the left and right part numbers are ordered separately and not mixed up.